If you are looking for China golden supplier and China good supplier polyken 942 black cold applied 3-ply pipe corrosion protection tape, good quality and high quality polyken 942 black cold applied 3-ply pipe corrosion protection tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.
System Description
The polyken 942 black cold applied 3-ply pipe wrap tape is a multilayer coating system designed for the corrosion protection of pipelines operating in highly corrosive environments and exposed to high mechanical stresses that may be present particularly on large diameter pipes.
The 3-ply adhesive system produces a strong cohesive bond to the primed steel surface, at the spiral overlap and to the mechanical outer layer.
Features
- Fully amalgamating overlapping areas
Forming a sleeve-type coating
- Impermeable to oxygen and moisture
- Resistant to soil stress
Superior in-ground performance
-Long-term in-ground performance
-Uniform coating thickness
Plant coating quality with in-situ application
-Low cathodic protection-current requirements
Saving cost over the life of the pipeline
-Compatible with all pipe diameters and generic plant coating systems
Structure
Inner-3ply POLYKEN 942-32 |
Outer-2ply POLYKEN 955-20 |
|
Backing : |
12mil(0.30mm) |
15mil(0.381mm) |
Adhesive Inner Layer : |
12mil(0.30mm) |
5mil(0.127mm) |
Adhesive Outer Layer: |
8mil(0.20mm) |
|
Total Thick |
0.80mm |
0.508mm |
Properties
UNIT |
TEST METHOD |
Inner layer-3ply tape |
|
POLYKEN 942-32 | |||
Total Thickness |
mil |
ASTM D 1000 |
32mil(0.8mm) |
Tensile strength |
N/cm |
ASTMD1000 |
112 |
Elongation at break |
% |
ASTMD1000 |
650 |
Peel strength to primed steel at 23 ℃ at 50℃ |
N/cm |
EN 12068 Annex C |
15 1.3 |
Peel strength tape to tape at 23 ℃ at 50℃ |
N/cm |
EN 12068 Annex B |
25 3.5 |
Peel strength layer to layer -Inner to Inner -Outer to Inner -Outer to Outer |
N/mm |
EN 12068 |
1.5 2.0 0.5 |
Dielectric strength |
Kv/mm |
ASTMD149 |
32 |
Insulation Resistance |
Ohm.m² |
EN 12068 |
1012 |
Water Vapor Transmission |
g/ m2 /24h |
ASTM E 96 |
0.1 |
Water Absorption |
% |
ASTM D 570 |
0.08 |
Impact resistance at 23° |
J |
EN 12068 |
18 |
Cathodic disbandment at 23°c at 50°c |
mm |
15 30 |
|
Lap shear strength at 50℃ |
N/mm2 |
EN 12068 |
0.05 |
Ordering Information
POLYKEN 942 and 955 tape coatings are in roll form.
Eg.: POLYKEN 942-32 4"×100'
Product Model No. |
Standard ordering options |
|
32 |
Total tape thickness in mils |
32mils(0.8mm) |
BLK |
Tape backing color |
Black (BLK) |
4 |
Tape width in inches |
2"(50mm),,4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) |
100 |
Tape roll length in feet |
50ft(15M)100ft(30M),200ft(61M) |